GreenTech

Modular dam design could accelerate the adoption of renewable energy

SwRI has developed a new modular steel buttress dam system that will help resolve energy storage issues hindering the integration of renewable resources into the energy mix. Prefabricated structural members are ten feet high and ten to forty feet long so they can be trucked to the site using standard or low-boy flatbed trailers via the interstate highway system. Structural elements are assembled on-site using common heavy construction equipment to erect the buttress framework, whose face is subsequently clad with cylindrically curved steel plates. Credit: Southwest Research Institute

Southwest Research Institute has developed a new modular steel buttress dam system designed to resolve energy storage issues hindering the integration of renewable resources into the energy mix. The m-Presa modular steel buttress dam system facilitates the rapid construction of paired reservoir systems for grid-scale energy storage and generation using closed-loop pumped storage hydropower (PSH), cutting dam construction costs by one-third and reducing construction schedules by half.

The m-Presa system will be featured at booth 313 at the Clean Currents Conference in Cincinnati from October 10–13.

Electric power systems use PSH for load balancing. The method uses the gravitational potential energy of water, pumped from a lower-elevation to a higher-elevation reservoir using low-cost, off-peak surplus electric power to run the pumps. During periods of high electrical demand, the stored water is returned to the lower reservoir, driving turbines to produce electric power.

Although the losses from the pumping process mean it consumes more energy than it generates, the system creates value by providing more electricity during periods of peak demand, when electricity prices are highest, which mitigates the challenges associated with huge daily swings in intermittent, variable and carbon-free renewable energy, such as solar and wind power.

SwRI's modular dam design could accelerate the adoption of renewable energy
SwRI created m-Presa to accelerate the deployment of closed-loop pumped storage hydropower units where both the upper and lower reservoir sites can accommodate circular or rectangular reservoirs on relatively flat terrain, such as caprock mesas with level tops, steep side slopes and gently sloped valley floors. The m-Presa™ modular steel buttress dam system facilitates the rapid construction of paired reservoir systems for grid-scale energy storage and generation using closed-loop pumped storage hydropower, cutting dam construction costs by one-third and reducing construction schedules by half. Water flows back and forth between the reservoirs to cyclically store and generate energy to balance the grid and provide energy to meet peak demands. Credit: Southwest Research Institute

“Pumped storage hydropower accounts for approximately 95 percent of all energy storage in the U.S., and modern PSH plants have a round-trip efficiency approaching 80-percent,” said Dr. Gordon Wittmeyer, a hydrologist in SwRI’s Chemistry and Chemical Engineering Division.

“However, only one moderate-sized 40 MW PSH plant has been constructed in the past two decades in the U.S. Three factors stand in the way of rapidly deploying PSH: cost to construct, time to construct and potential environmental impacts. The SwRI-developed m-Presa system addresses all three of these issues.”

Cost factors that continue to deter new investment in PSH include large capital costs—as much as $5,000 per kW installed capacity—and the lack of clear energy storage pricing signals. The m-Presa design could reduce construction costs to $1,500 per kW-installed capacity, making PSH competitive with other long-term energy storage modes.

Time to construct reservoirs is a significant cost component as well. It often takes 10 years to site, design, construct and commission a conventional PSH plant at a time when private investors are realizing paybacks of 10 years or less from subsidized solar and wind farms. Reducing the time between project initiation and revenue generation could make PSH more attractive than other solutions used to manage huge daily swings in solar generation, such as non-sustainable gas peaking plants or shorter-lived battery energy storage systems.

“We propose closed-loop pumped storage hydropower units by storing water in upper and lower reservoirs, impounded by buttress dams constructed from prefabricated structural steel modules,” Wittmeyer said. “These structural steel modules can be transported on standard-sized flatbed trailers to allow rapid modular construction of 10- to 40-foot-high buttress dams that can enclose a wide range of surface areas and water volumes.”

Potential environmental impacts of reservoir construction are another significant impediment to adoption of PSH when impounding a natural waterway. Potential environmental impacts associated with closed-loop PSH can be reduced or avoided if the upper and lower reservoirs are created by constructing fully enclosed dams separate from natural streams or rivers.

“The m-Presa system uses strong, long-lived steel buttress dams to create water impoundments that can store hundreds to thousands of MWhs of energy to supply power during periods of peak demand and provide ancillary services for grid stability,” Wittmeyer said. “A PSH unit using the m-Presa system can be constructed in less than half the time needed for traditional PSH units that use earthen embankment or concrete dams to impound water.”

Provided by
Southwest Research Institute

Citation:
Modular dam design could accelerate the adoption of renewable energy (2023, October 10)
retrieved 12 October 2023
from https://techxplore.com/news/2023-10-modular-renewable-energy.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

Share with your friends!

Leave a Reply

Your email address will not be published. Required fields are marked *

Get the latest technology news and updates

STRAIGHT TO YOUR INBOX

Thank you for subscribing.

Something went wrong.

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security